Features:
ANNIHILATOR Insecticide Premise Spray is intended to be used in and around residences and their immediate surroundings. ANNIHILATOR Insecticide Premise Spray's long-lasting action keeps on killing for up to 30 days after you spray. Contact kill gives you immediate results when spraying insects directly, while residual activity kills insects when they return to treated areas. Comes with Plastic applicator. Active ingredient: Deltamethrin.
Extended Information:
Ready-To-Use
Long-Lasting
Keeps Killing for Up to 30 Days
Contains Third Generation Pyrethroid
Active Ingredient: By Weight
Deltamethrin: (s)-cyano-3-phenoxybenzyl-(1R,3R)-3- (2,2-dibromovinyl)-2,2-dimethyl-cyclopropanecarboxylate 0.02% Other Ingredients 99.98%
Total 100.00%
Keep Out of Reach of Children
CAUTION
See below for additional precautions
Keep from Freezing
General Information: Hold container upright. Do not spray up into air. Apply to surfaces only as a spot and crack & crevice treatment. Turn sprayer nozzle to “open” or “on” position. Hold approximately 12 inches from surface to be sprayed. Squeeze trigger to spray until surface is slightly moist.
Annihilator Insecticide Premise Spray's long-lasting action keeps on killing for up to 30 days after you spray. Contact kill gives you immediate results when spraying insects directly, while residual activity kills insects when they return to treated areas. Annihilator Insecticide Premise Spray will not stain surfaces or fabrics.
Annihilator Insecticide Premise Spray is intended to be used in and around residences and their immediate surroundings such as (but not limited to): apartments, atriums, attics, automobiles, basements, bathrooms, boats, cabins, campers, carports, clothes storage, condominiums, decks, dens, driveways, garages, gazebos, homes, kitchens, lanai, living rooms, parlors, patios, pet sleeping areas, play rooms, porches, recreational vehicles, solariums, storage areas, sun rooms, utility rooms and verandahs. Do not use in commercial food handling establishments, restaurants or other places where food is commercially prepared or processed.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
INDOORS
Cockroaches (including adult and immature stages of both non-resistant and organophosphate and carbamate resistant strains), ants, booklice, boxelder bugs, centipedes, crickets, dermestids, firebrats, fleas, palmetto bugs, silverfish, sowbugs, ticks and waterbugs: Apply as a spot and crack & crevice treatment to areas where these pests crawl and hide, especially in hidden areas around sinks and storage areas, behind baseboards, around doors and windows, behind and under refrigerators, cabinets, sinks and stoves, the underside of shelves, drawers, bookcases, and similar areas. Cover all food handling surfaces and cover or remove all food and cooking utensils or wash thoroughly after treatment. Exposed food should be covered or removed. Repeat as necessary but not more than once per week.
Ants: Spray ant trails and around doors and windows and other places where ants enter the house. Repeat as necessary but not more than once per week.
Carpenter Ants: For effective control, locate and treat nests and surrounding areas. Apply around doors and windows and other places where ants enter premises and where they crawl and hide. Spray into infested wood through existing openings.
Ticks and Fleas on Surfaces: Remove pet bedding and destroy or clean thoroughly. Spray pet resting quarters. Adult fleas and larvae contacted by spray will be killed. Put fresh bedding down once spray has dried. Do not spray animals directly. For best results, pets should be treated with an appropriate flea and/or tick control product registered for use on pets before allowing them to return to the treated area. Spray rugs and carpets where infestations are bad. Delicate fabrics should be tested for staining in an inconspicuous area prior to use.
Silverfish, Crickets, Spiders: Apply along and behind baseboards, to window and door frames, corners, pipes, storage localities, attics, crawl spaces and other areas over which these pests may crawl.
Centipedes, Ground Beetles, Pillbugs, Sowbugs, Scorpions and Ticks: Apply around doors and windows and other places where these pests may enter premises. Treat baseboards, storage areas and other locations where these pests are found.
Bedbugs and Lice: Remove linens and wash before reuse. Lightly spray mattresses, especially tufts, folds and edges. Apply to the interior of the frame. Allow to dry before remaking bed.
FLYING INSECTS: House flies, gnats, mosquitoes and small flying moths: Spray localized resting areas, such as under eaves, porches, inside surfaces of windows and door frames, surfaces around light fixtures and cords, railings, etc. and anywhere these insects may rest. Insects coming to rest on treated surfaces will be killed.
HORSE STABLES AND/OR LIVESTOCK FACILITIES: To control stable flies, horn flies, house flies, face flies, horse flies, deer flies, mosquitoes and gnats. Apply thoroughly to surfaces until wet. Insects coming to rest on treated surfaces will be killed or repelled. Repeat as necessary but not more than once per week. Do not spray animals or humans, or apply to animal feed or watering equipment.
OUTDOORS
Point sprayer away from face. Hold sprayer on a slight downward angle, approximately 12 inches from surface to be sprayed. Spray with wind if breeze is blowing. Do not contaminate fish ponds or apply directly to water.
PESTS ON OUTSIDE SURFACES OF BUILDINGS: For control of building infestation with ants, clover mites, crickets and sowbugs (pillbugs). Spray foundation of building where insects are active and may find entrance up to a height of 2 to 3 feet. Apply to outside surfaces of buildings where insects tend to congregate. Spray areas include (but are not limited to) screens, window frames, eaves, porches, patios, garages and refuse dumps. Repeat treatment as necessary but not more than once per week.
CRAWLING INSECTS: ants, cockroaches (including Asian cockroaches), centipedes, crickets, mole crickets, water bugs and silverfish. Spray infested surface of patio or picnic area. Also spray legs of tables and chairs.
Ants: Spray freely around ant trails and hills. Spray around nests hidden under steps, brickwork, concrete, etc. Break apart accessible nests and spray freely on and around debris. Repeat as necessary but not more than once per week. Lone Star Ticks, Dog Ticks, Crickets and Fleas: Apply thoroughly to infestation in bushes, grass or weeds.
Wasps, Mud-daubers, Hornets, Yellow Jackets and Bees: Spray nests and other surfaces where bees may rest. Aim spray at nest openings. Applications should be made late in the evening when insects are at rest.
FLYING INSECTS: House flies, gnats, mosquitoes and small flying moths: Spray outside surfaces of window and door frames and other areas where these pests may enter the home. Also spray localized resting areas, such as under eaves, porches, surfaces around light fixtures and cords, railings, etc. where these insects may rest. Insects coming to rest on treated surfaces will be killed.
TERMITES, CARPENTER ANTS AND CARPENTER BEES: (for localized control only.) Apply Annihilator Insecticide Premise Spray to voids or channels in damaged wood of a structure, or to cracks, crevices and spaces in and between wooden portions of structure or between wood and the foundation, in locations vulnerable to attack such as crawl spaces. Retreat if needed but not more than once per week.
For termites, the purpose of such applications is to kill workers or winged forms which may be present in the treated areas at the time of application. Not recommended as sole protection against termites. For active infestations, get a professional inspection. Such applications are not a substitute for mechanical alteration, soil treatment or foundation treatment but are merely a supplement. For severe termite infestation contact a professional pest control operator in your area.
Warranty and Limitation of Damages
Seller warrants that this material conforms to its chemical description and is reasonably fit for the purposes stated on the label when used in accordance with directions under normal conditions of use and Buyer assumes the risk of any use contrary to such directions. Seller makes no other express or implied warranty, including any other express or implied warranty of Fitness or of Merchantability, and no agent of Seller is authorized to do so except in writing and with specific reference to this warranty. In no event shall Seller's liability for any breach of warranty exceed the purchase price of the material as to which a claim is made.
PRECAUTIONARY STATEMENTS Hazards to Humans & Domestic Animals
CAUTION Contact with product may result in transient tingling and reddening of the skin. Avoid contact with skin or clothing. Environmental Hazards This product is extremely toxic to fish and aquatic invertebrates. Do not apply directly to water. Do not contaminate water when disposing of washwater or rinsate. This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area. Physical/Chemical Hazards Do not apply this product in or on electrical equipment due to the possibility of shock hazard.
STORAGE & DISPOSAL
Storage: Store in a cool, dry area away from children.
Pesticide Disposal: Call your local solid waste agency or 1-800-CLEANUP for disposal instructions. Never place unused product down any indoor or outdoor drain.
Container Disposal: Do not reuse this container. Place in trash or offer for recycling if available.
|